Dreambox - Beispiel - Set 7c
with skimmer Bubble King® DeLuxe 300
and with Red Dragon® 3 Speedy 80Watt 8,0m3 return pump
Technical data Dreambox size M:
Dimensions: 150 cm wide x 60 cm length x 35 cm height (65 cm skimmer)
Volume: ~ 280 Liter
- high quality rigid PVC and Plexiglas® (plexiglass)
- hot gas welded not glued,
plastic welding never leak as like glass filter cases with silicone gaskets - significantly sturdily, shock proof and lower weight compared to glass
- 8 mm thickness of PVC and Plexiglas® (plexiglass)
- extremely noise-dampening by construction
- fully prepared for the upgrade with media filters
- filter socks in different grain sizes available,
adapt to your own needs and desired properties of water possible - crystal clear fine filtration according to customer's wishes and needs
- Intelligent forced water supply by all chambers
- inside spill safe by integrated CNC milled emergency overflows, even with 100% blockage of the filter socks are forwarding into the next Chamber
- Sea-waterproof titanium bolts
- by various options can be upgraded to the high-tech filter tank
- precise CNC milled cover preparation and adaptation for new purchase of a Royal-Exclusiv® skimmers
- from 100 cm box with oxygen degassing Chamber
- from 60 cm box with water level regulation for skimming Chamber,
Water level adjustable from 14 cm-23 cm - self pick-up discount applies only to Dreambox:
small Nano- and Dreamboxen 50-100 cm pickup factory Cologne, unpackaged 7.5%
great Dreamboxen from 125 cm Gr.S pickup factory Cologne, unpackaged 5% - 100% Made in Germany / Assembly by hand
- with DIN connectors/tubes
- 30 Years of experience in PVC filter and skimmer construction
Dreamboxes_overview_list.pdf
Upgrading by the following accessories possible:
LED lighting
Float switch
Level switch with slider and bar
Probe-/Dosing-holder
Cable Holder complete by assembly ex factory / ex works
Suitable for all Dreamboxes:
- high quality rigid PVC
- CNC milled
- for all Nano Dreamboxes / Dreamboxes and Dreambox water tanks
- assembly ex works
- circa 12 pieces (ca. 6 pieces for skimmer-pump, ca. 6 pieces for return-pump)
Dreambox milled cover suitable for skimmer Bubble King® DeLuxe 300
- high quality PVC with protection film
- CNC milled
- assembly ex works
unit price 1.493,91 EUR
With skimmer Bubble King® DeLuxe 300 with RD1 or RD3
for aquariums from 1.200 liter - 3.000 liter
hard facts Bubble King® 300 DeLuxe internal:
2.000 l/h Air - 4.000 l/h Water = 1 Pump (Bubble King®) BK 2000
Base plate: 32 cm x 50 cm / height ~ 65 cm
Technical data Bubble King® 300 DeLuxe internal:
Skimmer-pump: Bubble King® 2000 internal
Delivery rate: 2.000 l/h Air inlet ~ 4.000 l/h Water inlet
Wattage - active power: P = 58 Watt/h
Operating voltage: 230 Volt 50 Hz (also in 110V/60Hz available)
Protection class: IP 68
Water level: ~ 180 mm up to ~ 270 mm
Weight skimmer: 16 kg inclusiv pump
Dimension skimmer: 320 mm wide / 500 mm length / ~ 650 mm height
Data_sheet.pdf
Spare_parts_and_accessories.pdf
Operating_and_maintenance_manual.pdf
unit price 2.051,33 EUR
And return-pump
Red Dragon® 3 Speedy pump 80 Watt / 8,0m³ AKB anti-lime-bypass
Technical data Red Dragon® 3 Speedy pump 80 Watt 8,0m³:
80 Watt/h 5,2 mtr. pressure height
speed adjustable Brushless DC pump
Watt-Display / adjustable in 5W steps
intake side 50 mm - pressure side 32 mm
operating voltage: 230 Volt 50 Hz (also in 110V/60Hz available)
Protection class pump: IP 68 control unit: IP 66
Weight pump: 3,4 kg
Weight controller: 1,1 kg
Height of intake side: center 70 mm
Dimension pump: 130 mm wide / 235 mm length / ~ 190 mm height
Dimension control unit: 140 mm breit / 190 mm length / ~ 70 mm height
- Saltwater resistant M6 grade 2 titanium screws
- Saltwater resistant parabolic rubber feet for acoustic decoupling
- Extreme low noise brushless dc-delivery pump with grouted power electronics
- High efficient technology "Made in Germany"
- Inlet and Outlet complete with DIN connection, compact dimensions
- High performance ceramics bearings and hollow shaft for bypass purging in the rotor housing
- Only saltwater resistant pump with titanium rotor, titanium stator and shrivelled bearings
- Easy usage and maintenance. Low risk of calcification due to polished titanium parts and compulsory purgeing
- Heavy and massive craftsmanship against vibrations and oscillation
- CE conformity, developed and built according to VDE guidelines
unit price 714,65 EUR
////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
all-inclusive price: 4.259,89 EUR
7,5% Set discount (with purchase of Dreambox + skimmer + return-pump in a set): 3.940,40 EUR
Optional without return pump
5% Set discount (with purchase of Dreambox and skimmer in a set, without Return-pump): 3.367,98 EUR
This Product was added to our catalogue on 17/04/2013.