Dreambox - sample - Set 1f /// Complete system
with skimmer Mini Bubble King 200
with Red Dragon® 3 Mini Speedy pump 50 Watt 1.500 l/h
with float switch with switchable power outlet 230V
incl. Cable holder and Controller holder
with Dreambox Water tank and Dreambox Refugium
and with Heater/Heating- and Sensor holder for Schego-Heating
Nano Dreambox - filter system size M
Technical data Nano Dreambox size M:
Dimensions: 60 cm wide x 49 cm length x 35 cm height (56 cm skimmer height)
Volume: ~ 90 Liter
- high quality rigid PVC and Plexiglas® (plexiglass)
- hot gas welded not glued,
plastic welding never leak as like glass filter cases with silicone gaskets - significantly sturdily, shock proof and lower weight compared to glass
- 8 mm thickness of PVC and Plexiglas® (plexiglass)
- extremely noise-dampening by construction
- fully prepared for the upgrade with media filters
- filter socks in different grain sizes available,
adapt to your own needs and desired properties of water possible - crystal clear fine filtration according to customer's wishes and needs
- Intelligent forced water supply by all chambers
- inside spill safe by integrated CNC milled emergency overflows, even with 100% blockage of the filter socks are forwarding into the next Chamber
- Sea-waterproof titanium bolts
- by various options can be upgraded to the high-tech filter tank
- precise CNC milled cover preparation and adaptation for new purchase of a Royal-Exclusiv® skimmers
- from 100 cm box with oxygen degassing Chamber
- from 60 cm box with water level regulation for skimming Chamber,.
Water level adjustable from 14 cm-23 cm - self pick-up discount:
small Nano- and Dreamboxen 50-100 cm pickup factory Cologne, unpackaged 7.5%
great Dreamboxen from 125 cm Gr.S pickup factory Cologne, unpackaged 5% - 100% Made in Germany / Assembly by hand
- with DIN connectors/tubes
- 30 Years of experience in PVC filter and skimmer construction
Dreamboxes_overview_list.pdf
Upgrading by the following accessories possible:
LED lighting complete with assembly
Level switch with slider and bar
Cable Holder complete by assembly ex factory / ex works
Suitable for all Dreamboxes:
- high quality rigid PVC
- CNC milled
- for all Nano Dreamboxes / Dreamboxes and Dreambox water tanks
- assembly ex works
- circa 12 pieces (ca. 6 pieces for skimmer-pump, ca. 6 pieces for return-pump)
Dreambox milled cover suitable for skimmer Bubble King® Double Cone 180
- high quality PETG with protection film
- CNC milled
- assembly ex works
unit price 966,87 EUR
With skimmer Mini Bubble King 200 with Red Dragon® 3 Mini Speedy 50Watt 1.500l/h
for aquariums up to 1.000 liter
hard facts Mini Bubble King 200 extra slim VS:
from 500 to max. 1.500 l/h air-intake // from 1.500 to max. 4.000 l/h water-intake
with Red Dragon® 3 Mini Speedy pump 50 Watt / 1.500 l/h air intake
Base plate: 22 cm x 22 cm / height ~ 56 cm
Technical data Mini Bubble King 200 extra slim VS:
Skimmer-pump: Red Dragon® 3 Mini Speedy pump 50 Watt / 1.500 l/h air intake
Delivery rate: from 500 to max. 1.500 l/h air-intake // from 1.500 to max. 4.000 l/h water-intake
Wattage - active power: P = 15-50 Watt/h
Operating voltage: 230 Volt 50 Hz (also in 110V/60Hz available)
Protection class: IP 68
Water level: ~ 130 mm up to ~ 300 mm
Weight skimmer: 8.3 kg inclusiv pump and controller
Height of intake side: center 70 mm
Dimension skimmer: 300 mm wide / 220 mm length / ~ 555 mm height
Red Dragon® 3 Mini Speedy pump 50Watt 1.500 l/h
Technical data Red Dragon® 3 Mini Speedy pump 50 Watt / 1.500 l/h air intake:
max. 50 Watt/h, adjustable 15-50 Watt
speed adjustable Brushless DC pump
Intake side: Nozzle with ozone & air plug
Pressure side: reducing ring Ø 32 mm
Delivery rate: from 500 to max. 1.500 l/h air-intake // from 1.500 to max. 4.000 l/h water-intake
Operating voltage: 230 Volt 50 Hz (also in 110V/60Hz available)
Protection class pump: IP 68 control unit: IP 66
Weight pump: 3,5 kg
Dimension pump: 100 mm wide / 210 mm length / ~ 140 mm height
Dimension control unit: 120 mm wide / 160 mm length / ~ 65 mm height
- Saltwater resistant M6 grade 2 titanium screws
- Saltwater resistant parabolic rubber feet for acoustic decoupling
- Extreme low noise brushless DC skimmer-pump with grouted power electronics
- High efficient technology "Made in Germany"
- compact dimensions
- High performance ceramics bearings and hollow shaft for bypass purging in the rotor housing
- Only saltwater resistant pump with titanium rotor, titanium stator and shrivelled bearings
- Easy usage and maintenance. Low risk of calcification due to polished titanium parts and compulsory purgeing
- Heavy and massive craftsmanship against vibrations and oscillation
- CE conformity, developed and built according to VDE guidelines
unit price 1.214,54 EUR
Dreambox - special - float switch with switchable power outlet
Suitable for all Dreamboxes and Dreambox water tanks:
Dreambox water level float switches
incl. solid floating holder and fixing screw
for mounting directly on the Dreambox or a refill tanks.
Technical data:
- rust-resistant, because completely made of plastic
- release angle 5-15 ° below or above the fixation point
- very reliable product from the industry
- CNC machined masivem 50 mm PVC full block holder
- with fixing screw
- maximum switching load 500 watts!
- ready for connection with connector and switchable power outlet for a consumer (E.g., pump)
Can be normally open or close delivered please choose above! I.e. without triggering the sensor, the socket is supplied or not supplied with power.
Data_sheet_and_operating_manual.pdf
unit price 167,76 EUR
The Nano Dreambox will be ready for connection, including all sets of decoupling and controller holder. ////////////////////////////////////
Dreambox - water tank with cover and 20mm DIN-connection
Technical data Dreambox water tank:
Dimensions: 25 cm wide x 49 cm depth x 50 cm height
Volume: ~ 50 Liter
capability of connecting additional components: 20mm DIN-connection, 8mm hole, plug connector and level switch
- high quality rigid PVC and Plexiglas® (plexiglass)
- hot gas welded not glued, plastic welding never leak as like glass filter cases with silicone gaskets
- significantly sturdily, shock proof and lower weight compared to glass
- 8 mm thickness PVC
- opening/lid 160x170mm
- 100% Made in Germany / Assembly by hand
- with DIN connectors/tubes
- precise CNC milled cover,
- 30 Years of experience in PVC filter and skimmer construction
Dreambox_water_tanks_overview_list.pdf
Upgrading by the following accessories possible:
LED lighting
Float switch
Level switch
unit price 425,48 EUR
Dreambox - refugium // aquariums for floor unit mounting
Technical data:
Dimensions: 15 cm wide x 49 cm length x 50 cm height
Volume: ~ 25 liters
Tanks made of 8 mm PVC with 8 mm PETG front pane for installation in the floor unit and direct connection to a Dreambox
- including pipes breakthroughs with DIN connectors/tubes
- inlet connection 20 mm rear left
- outlet tube 32 mm on top optionally either left or right side panel
(when ordering please specify, standard left) - open design intended for LED lighting
- universal usable as algae refuge, quarantine tank, Aquarium treatment, mud - or sand filters,
as microcosm without fish, seahorses Aquarium, etc. - on request:Accurate CNC milled cover
(optional with the discovery 8 mm available. Extra charge + 25%) - high quality rigid PVC and Plexiglas (plexiglass)
- hot gas welded not glued,
plastic welding never leak as like glass filter cases with silicone gaskets - significantly sturdily, shock proof and lower weight compared to glass
- incl. slot pipe, 15 cm length
- 100% Made in Germany / assembly by hand
- 30 Years of experience in PVC filter and skimmer construction
Dreambox_refugia_overview_list.pdf
unit price 359,17 EUR
Dreambox Heating Holder 25mm bar-heating-element
for example suitable for Schego Heating element / heater:
- high quality rigid PVC
- CNC milled
- for all Dreamboxes, Dreambox water tanks and Dreambox refugias or third party filter-tanks
- dimensions socket: Ø 100mm x 30mm height
- deliver without heating element
unit price 57,75 EUR
Dreambox sensor bar for 20 mm tube/pipe
Suitable for all Nano Dreamboxes and Dreamboxes:
- high quality rigid PVC
- CNC milled
- for all Nano Dreamboxes / Dreamboxes with ~ Ø 20 mm tube/piping inlet
- fits for 20 mm PVC pipe
- with 26 cm long red PVC pipe
- perfect fit for the sensor of a Schego heating element
- deliver without sensor
unit price 34,04 EUR
//////////////////////////////////////////////////
all-inclusive price: 3.225,61 EUR
5% Set discount (with purchase of Dreambox and skimmer in one set): 3.064,33 EUR
This Product was added to our catalogue on 10/06/2013.