AutoSwitch ON/OFF with non-contact level switch -capacitive- and switchable plug

AutoSwitch ON/OFF with Capacitive non-contact level sensor
and switchable plug-socket with delay release 

Suitable for filter boxes and water tanks:

Capacitive non-contact level sensor for filter sumps and water tanks.
Made in Germany  *industrial quality*
Non-contact measures the water level in tanks and filter systems.
incl. switchable plug-socket with delay release
incl. bar, slide and plastic knurled screw 
incl. screws for the mounting

The PVC slide for the mounting at the tank/sump/basin is available in 3 differ sizes
160mm
250mm
320mm

2m cable or 10m cable length for sensor available

Please choose the size you need at the menue

Technical data:

• Wet room suitable, because completely made of plastic
• comes not in contact with the water, not calcify / salting possible
• the controller-box with 1,6m cable have following dimensions: approx. 170mm x 120mm x 90mm (height)
• use as a normally opener or normally closer available
• 230 Volt-version (no transformer required)
• mounted outside of a Filter-box-sump-tank
• Switch distance approx. 8 mm - Adjustable switching hysteresis / teach-function with empty-or-full-state
• operation display throw with LED lamp
• maximum load: 2500 watts!
   

  ---

  
  An normally close contact (opener) cuts off the electrical circuit if the sensor is active.
  (If this rests and has not been pressed, there is contact) known also as normally closed.
  
  A normally open contact (closer) closes the electrical circuit if the sensor is active.
  (If this is activated, functions, contact is) known also as work contact.
   

  ---

  Data_sheet_and_operating_manual.pdf