AutoSwitch ON/OFF with Capacitive non-contact level sensor and switchable plug-socket with delay release
Suitable for filter boxes and water tanks:
Capacitive non-contact level sensor for filter sumps and water tanks. Made in Germany *industrial quality* Non-contact measures the water level in tanks and filter systems. incl. switchable plug-socket with delay release incl. bar, slide and plastic knurled screw incl. screws for the mounting
The PVC slide for the mounting at the tank/sump/basin is available in 3 differ sizes 160mm 250mm 320mm
2m cable or 10m cable length for sensor available
Please choose the size you need at the menue
Wet room suitable, because completely made of plastic
comes not in contact with the water, not calcify / salting possible
the controller-box with 1,6m cable have following dimensions: approx. 170mm x 120mm x 90mm (height)
use as a normally opener or normally closer available
230 Volt-version (no transformer required)
mounted outside of a Filter-box-sump-tank
Switch distance approx. 8 mm - Adjustable switching hysteresis / teach-function with empty-or-full-state
operation display throw with LED lamp
maximum load: 2500 watts! An normally close contact (opener) cuts off the electrical circuit if the sensor is active. (If this rests and has not been pressed, there is contact) known also as normally closed.
A normally open contact (closer) closes the electrical circuit if the sensor is active. (If this is activated, functions, contact is) known also as work contact.