non-contact level switch -capacitive-

Capacitive non-contact level sensor

Suitable for filter boxes and water tanks:

Capacitive non-contact level sensor for filter sumps and water tanks.
Made in Germany  *industrial quality*
Non-contact measures the water level in tanks and filter systems.
incl. screw connection

Technical data:

• Wet room suitable, because completely made of plastic
• comes not in contact with the water, not calcify / salting possible
• Mounting in M30 x 1.5 thread
• normally open or normally closed available
• 230 Volt-version (no transformer required)
• can be mounted outside or inside a Filter-box-sump-tank
• Switch distance approx. 15 mm - Adjustable switching hysteresis. 5-15 mm (orange small screw)
• Mini screwdriver is included
• with LED lamp
• maximum load: 60 watts!
  (a switching relay must be used when over 60 Watt switching power)
   

  ---

  
  An normally close contact (opener) cuts off the electrical circuit if the sensor is active.
  (If this rests and has not been pressed, there is contact) known also as normally closed.
  
  A normally open contact (closer) closes the electrical circuit if the sensor is active.
  (If this is activated, functions, contact is) known also as work contact.
   

  ---

  Data_sheet_and_operating_manual.pdf